Indirect Support Design

Hanger Reinforcement per EN 1992-1-1 §9.2.5
← Back to Dashboard

Design Parameters

1. Supporting Beam (Primary)
mm
mm
2. Supported Beam (Secondary)
mm
mm
3. Loads & Materials
?
kN
N/mm²

Calculation Results

Required Area (Asw,req) ℹ️ 0 mm²
Placement Limit (a) ℹ️ 0 mm
Placement Limit (d) ℹ️ 0 mm
Provide (Total Legs) 0 Legs
(0 mm² provided)
Geometry Check

Geometry Visualizer (Plan View)

Hanger Reinforcement: Red lines indicate the required additional links placed across the Primary Beam (vertical) at the intersection with the Secondary Beam (horizontal).
Blue Lines: Show code limits 'a' (width) and 'd' (depth) for reinforcement placement.
Professional Disclaimer

StrucTalogue is a software tool intended solely as a preliminary design, analysis, and estimation aid. It does not replace professional judgment, independent verification, or formal structural engineering design. All results generated by StrucTalogue must be reviewed, checked, and approved by a qualified and licensed Professional Structural Engineer or equivalent authority prior to any real-world use.

By proceeding with using this software, you acknowledge and agree that StrucTalogue is not intended for final design, construction, permitting, or life-safety applications, and that StrucTalogue and its developers shall not be liable for any damages, losses, or claims arising from the use or misuse of the Service. Your subscription is subject to our Terms & Conditions and Privacy Policy.