Calculating Forklift Loads as per EN 1991-1-1
Learn the critical steps for calculating the vertical and horizontal loads imposed by forklifts as per Eurocode standards.
Read full guide →Understanding Imposed Load Reductions as per EN 1991-1-1
Learn how reductions can be applied to imposed loads in certain cases as per Eurocode standards.
Read full guide →Demystifying Wind Loads: A Beginner's Guide to EN 1991-1-4
Learn how to calculate wind loads as per Eurocode standards.
Read full guide →Designing Indirect Supports: Hanger Reinforcement as per EN 1992
Learn how to design additional hanger reinforcement as per Eurocode standards.
Read full guide →Anchorage and Lap Lengths: EN 1992-1-1 Guide
Learn how to properly design anchorage and lap lengths as per Eurocode standards.
Read full guide →Navigating Thermal Break Connections in Steel Design
Learn the critical steps for designing end plate connections with non-metallic thermal breaks to meet modern energy standards.
Read full guide →Common Pitfalls in Timber Beam Deflection Checks
A quick guide to correctly applying creep factors (kdef) and service classes in your long-term deflection calculations.
Read full guide →Simplifying Slenderness Checks for Masonry Walls
How to efficiently verify vertical loading capacity and horizontal bending without getting lost in EC6 reduction factor tables.
Read full guide →Demystifying Punching Shear Perimeters in Flat Slabs
Step-by-step methodology for determining basic and reduced control perimeters for internal, edge, and corner columns.
Read full guide →Mastering Wind Load Calculations as per EN 1991-1-4
Guide on how wind loads are calculated, transforming a velocity into peak pressure and application of pressure coefficients across different structural zones according to EN 1991-1-4.
Read full guide →Demystifying Limit States: EQU, STR, GEO and Load Combinations
A guide explaining the various limit states defined in EN1990.
Read full guide →Beyond the Safety Factor: Understanding Characteristic Values and Probability of Failure
The theory behind Eurocodes safety factors explained.
Read full guide →Understanding U-Value Calculations per EN ISO 6946
Learn how architects use U-value calculations in building specifications.
Read full guide →No articles found
Try adjusting your search terms or clearing your filters.